English
Home
Home / No More Nails / Small glue 502 for wood 20ml liquid nails

Small glue 502 for wood 20ml liquid nails

Lvkang Brand Nail free adhesive has strong adhesive force and can replace nails to the maximum extent. It does not need to drill holes on the surface to fix and bond wood, doors and windows, gypsum board, medium density fiberboard, stone, ceramic tile, metal, plastic, rubber and other materials.



Product features:



1, super strong initial adhesion, high adhesive strength



2, widely used, can bond most substrates, even wet wood



3, flexible, weather resistant, waterproof, non detachable, and will not affect the adhesion due to the contraction and movement of the building



4. It will not sink. It can be caulked and painted after drying



5, no formaldehyde, benzene and other harmful substances.



6, chemical corrosion resistance, cold resistance, high temperature resistance (- 20 ℃ to 90 ℃)



Usage method:



1. Clean the construction surface to ensure no oil and dirt



2. Cut the nozzle, put on the rubber nozzle and extrude with the sealing gun



Dry bonding method: (applicable to the joints with light materials and light pressure) extrude several lines of nail free adhesive in zigzag shape, 40 cm apart from each other, press the adhesive side against the adhesive, and then gently pull it apart until the adhesive volatilizes for two minutes, and then press the two sides.



Wet bonding method: (applicable to heavy materials)

Apply nail free adhesive by the above method, and then tighten or nail both sides of the adhesive with clamp, iron nail or screw. After the adhesive is dry (about 24 hours), remove the clamp. The nail free adhesive can still move within 20 minutes after bonding, adjust the bonding position, and become more stable within 2 to 4 days after bonding, and achieve the best effect in 7 days.



Matters needing attention:



1. When the nail free adhesive has not yet set, it can be removed with loose water. After drying, it can be scraped or ground out to expose residual stains. This product can be used when laying the floor.



2. The adhesive force will be weakened under high temperature (avoid bonding metal exposed to sunshine for a long time)



Warning:



1. This product is dangerous and should be stored in a cool and dry place. The construction environment must be well ventilated and away from high temperature and fire source.



2. This product should be stored in a place out of reach of children, avoid contact with eyes, and do not pour into the sewer. If swallowed by mistake, immediately send to the hospital for first aid and show the product container or label.



3. In case of dizziness and other adverse conditions during use, please go outdoors to breathe fresh air or seek medical treatment immediately.



4. If the product comes into contact with the eyes, please rinse the eyes with water for 15 minutes, and then seek medical attention immediately.



Product shelf life: 12 months
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Lvkang Brand Nail free adhesive has strong adhesive force and can replace nails to the maximum extent. It does not need to drill holes on the surface to fix and bond wood, doors and windows, gypsum board, medium density fiberboard, stone, ceramic tile, metal, plastic, rubber and other materials.

产品特性1产品应用1

Product features:


1, super strong initial adhesion, high adhesive strength


2, widely used, can bond most substrates, even wet wood


3, flexible, weather resistant, waterproof, non detachable, and will not affect the adhesion due to the contraction and movement of the building


4. It will not sink. It can be caulked and painted after drying


5, no formaldehyde, benzene and other harmful substances.


6, chemical corrosion resistance, cold resistance, high temperature resistance (- 20 ℃ to 90 ℃)


Usage method:


1. Clean the construction surface to ensure no oil and dirt


2. Cut the nozzle, put on the rubber nozzle and extrude with the sealing gun


Dry bonding method: (applicable to the joints with light materials and light pressure) extrude several lines of nail     free adhesive in zigzag shape, 40 cm apart from each other, press the adhesive side against the adhesive, and         then gently pull it apart until the adhesive volatilizes for two minutes, and then press the two sides.


Wet bonding method: (applicable to heavy materials)

Apply nail free adhesive by the above method, and then tighten or nail both sides of the adhesive with clamp,        iron nail or screw. After the adhesive is dry (about 24 hours), remove the clamp. The nail free adhesive can still        move within 20 minutes after bonding, adjust the bonding position, and become more stable within 2 to 4 days      after bonding, and achieve the best effect in 7 days.


Matters needing attention:


1. When the nail free adhesive has not yet set, it can be removed with loose water. After drying, it can be scraped        or ground out to expose residual stains. This product can be used when laying the floor.


2. The adhesive force will be weakened under high temperature (avoid bonding metal exposed to sunshine for a          long time)

Product shelf life: 12 months


CONTACT INFORMATION:


Mob/whatsapp/wechat: 008618353242810



Previous: 
Next: