- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 3 Author: Lisa Publish Time: 2022-09-07 Origin: Site
Lvkang MS Polymer is one-component adhesive special for wood flooring installation.
We recommend that wherever possible you glue your wood floor directly to your subfloor. The method for using wood flooring adhesive is remarkably similar to that of apply tiling adhesive, though you do need to consider a few factors prior to installation, which we’ll overview in this section.
Here are some of the advantages you can benefit from when gluing your new floor:
Gives you a solid feel to the floor (floating can feel spongy)
Massively reduces chance of developing squeaky floor boards
In most insurance policies, a fully bonded floor classes as structural and is on the building insurance, whereas floated floors are seen as temporary and need to be declared on your contents insurance.
It more secure than floating
Reduces Excessive movement of the floor
Can be a more cost effective solution when compared to using specialist UFH underlays and the requirement tongue and groove adhesive.
Here at The Solid Wood Flooring Company we’ve worked out to develop our own lvkang MS floor adhesive. This product is only available through ourselves and works perfectly with all wood floors including parquet, bamboo, solid and engineered boards.
Most environmentally friendly flooring adhesive
Single Component
Easy to Use & Handle
Soft Elastic
Low Emissions
Water & Solvent Free
Nearly No Swelling of the Wood
Good Adhesion to Almost all Substrates
Easily Removed if Splashed
Firm Visocity with Retains Trowel Pattern
Rapid Initial Bonding Strength
Before you fit your floor you must always check the moisture content of the room you’re fitting in. According to BS8201:2011 which is the standard your floor just be fitted to, the maximum moisture content of subfloor must be less than 2%. You must also not fit a wood floor in rooms where the relative humidity is not within 35-55%. You can check these levels by using a Hygrometer. For more information on subfloors please see: Suitable Subfloors.
Use our MS Flooring Adhesive with a trowel. This is so you can easily, evenly spread the adhesive on the sub floor before fixing the boards down. Using this method, small undulations in the floor will be covered and you’ll achieve maximum surface adhesion.
If the subfloor’s concrete, it must have a moisture content of less than 2%. The floorboards must also be unpacked and laid out before you start to fit. This is so you can see the colour variation in the wood, as you select each board individually as youstart to glue. MS Polymer adhesives are flexible and dry like a hard rubber. They will also cure from moisture in the air so the floor can be walked on after roughly 24 hours.
Adhesive can be sanded
Floor can be walked on / sanded 12 / 24 hours
Elastic, footfall-sound dampening properties
Reduces stress transfer between the wood floor and the substrate
Suitable for common types of wood floors
590 ml foil pack, 20 foil packs per box
Polyurethane
SikaBond® T-53 has a shelf life of 12 months from the date of production, if it is stored properly in undamaged, original, sealed packaging, and if the storage conditions are met.
MS Flooring Adhesive shall be stored in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.
1.20 g/ml approx
If you’d like to discuss our MS flooring adhesive in more detail please contact our experts on +86 158 5394 8687 or email lisa_vcbm@163.com alternatively, you can visit the product page: MS Flooring Adhesive
CONTACT US
Phone: +86 15853948687
Email: lisa_vcbm@163.com
Address: Lanshan District, Linyi city, Shandong, China 276000
